The chiller's ice water pipe must be insulated, because pipe insulation can not only prevent serious loss of cold, but also prevent condensation on the outer wall of the pipe. For example: the ice water temperature is 10 degrees, the ambient temperature is 30 degrees, and the heat radiation of a 25-meter-long metal pipe with a surface area of 25 square meters can be.
This is about 10% of the cooling capacity generated by a three-horsepower compressor and about 6% of the cooling capacity generated by a five-horsepower compressor; the air-cooled chiller is one type of chiller. It cools the water at room temperature to a certain temperature through the compressor of the chiller to strengthen the cooling of the mold or machine. As a single machine, the heat dissipation device is a built-in fan.
There are three main interconnected systems: refrigerant circulation system, water circulation system, and electrical automatic control system. The surface cleaning of the chiller is also very important. After stopping, you can use cleaning tools to clean the surface of the unit. After it is dry, cover the unit with cloth or a coat to prevent dust and other debris from adhering to the unit.
Ensure that the chiller is still clean when it is used next year. Doing the above work when the unit is shut down can timely discover the problem of the chiller and eliminate it, ensure the stable performance of the unit, and facilitate safe and quick use next year. Another benefit is that the service life of the unit will be longer
