How much power chiller does the 500KG extruder match?

- 2023-07-20-

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 500KG output. Chiller. Extrusion capacity 500KG/H. The chilled water flow rate is 12.5m³/H. If it is an air-cooled chiller, choose 25HP cooling capacity, and the model is JSFL-25. If it is a water-cooled chiller, choose 25HP cooling capacity. The model is JSSL-25. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

JSFL-25, 25HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 75KW, compressor power: 25HP/18.7KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 245L, evaporator structure: Coil type/(shell-and-tube) condenser structure: fin type, pump power: 2200W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN50, weight 900KG.

JSSL-25, 25HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 75KW, compressor power: 25HP/18.7KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 250L, evaporator structure: Coil type, condenser structure: shell and tube type, water pump power: 2200W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN50, weight 780KG.

Application diagram of extruder matching chiller

Working principle diagram of extruder and chiller

Summary: The application of chiller to extruder can improve the production efficiency of product molding, and it is also suitable for extruders of insulating materials such as PVC, LSHF, TPU, LDPE, and XLPE. The extruder for single-color, double-color, double-layer and three-layer extrusion operations of wire and cable is a very practical device for cooling, protecting the life of the equipment, saving energy and so on. Recycling cooling water can save energy and resources and realize environmental protection.

If there is any industry that needs cooling, but you don’t know how much power to match, you can leave a message to us, or contact plus friends +86-13925748878 (same number on WeChat)/(same number on whatsapp), email: jiusheng@dgchiller.com, we will Will provide you with technical solutions. Looking forward to your consultation, thank you!