What power chiller does the 40KG extruder match?

- 2023-07-11-

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you to match the corresponding power of the extruder with a 40KG output. Chiller. The extrusion capacity is 40KG/H. The chilled water flow rate is 0.9m³/H. If it is an air-cooled chiller, choose 2HP cooling capacity, and the model is JSFL-02. If it is a water-cooled chiller, choose 3HP cooling capacity. The model is JSSL-03. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

JSFL-02, 2HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 6KW, compressor power: 2HP/1.5KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 45L, evaporator structure: Coil type/(shell-and-tube) condenser structure: fin type, pump power: 375W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN25, weight 140KG.

JSSL-03, 3HP water-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigeration capacity: 9KW, compressor power: 3HP/2.25KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 50L, evaporator structure: Coil type, condenser structure: shell and tube type, water pump power: 375W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN25, weight 140KG.

Extruder matching chiller application type: Schematic diagram of air-cooled shell and tube chiller


Schematic diagram of water-cooled shell and tube chiller

Reference diagram of water-cooled shell-and-tube chiller with extruder (power size is optional)

Working principle diagram of extruder and chiller

Summary: Chillers applied to extruders can improve the production efficiency of wire rod forming, and are suitable for extruders of insulating materials such as PVC, LDPE, XLPE, LSHF, and TPU. And it also has the functions of reducing temperature, improving efficiency, protecting equipment, improving product quality, energy saving and environmental protection, etc., which plays an important role in the extrusion process. Recycling cooling water can save energy and resources and realize environmental protection.

If there is any industry that needs cooling, but you don’t know how much power to match, you can leave a message to us, or contact plus friends +86-13925748878 (same number on WeChat)/(same number on whatsapp), email: jiusheng@dgchiller.com, we will Will provide you with technical solutions. Looking forward to your consultation, thank you!