What power chiller does the 150KG extruder match?

- 2023-07-13-

The chiller can be divided into two types in the application of the extruder, one is to cool the extrusion die, and this one can use a standard chiller. There is another type of water tank for cooling the extruder line groove. This model needs to use a shell-and-tube chiller (the evaporator is a shell-and-tube closed type). Jiusheng will teach you that the 150KG output extruder matches the corresponding power. Chiller. Extrusion capacity 150/H. The chilled water flow rate is 3.7m³/H. If it is an air-cooled chiller, choose 8HP cooling capacity, and the model is JSFL-08. If it is a water-cooled chiller, choose 8HP cooling capacity. The model is JSSL-08. The water-cooled chiller needs to be connected to a pipeline water pump and a water tower. The air-cooled chiller can be used independently and is easy to install.

JSFL-08, 8HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigerating capacity: 24KW, compressor power: 8HP/6KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 145L, evaporator structure: plate Tubular/(shell-and-tube) condenser structure: finned, pump power: 750W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN40, weight 350KG.

JSSL-08, 8HP air-cooled chiller parameters: (standard type, shell and tube type parameters need to be confirmed with customer service)
Refrigerating capacity: 24KW, compressor power: 8HP/6KW, voltage frequency: 3PH-380V-50HZ (you can consult customer service to customize voltage frequency according to different countries), compressor brand: Panasonic, water tank capacity: 140L, evaporator structure: plate Tube type, condenser structure: shell and tube type, water pump power: 750W, refrigerant model: R22 (you can consult customer service to customize environmentally friendly refrigerants), inlet and outlet diameter: DN40, weight 430KG.

Air-cooled shell and tube chiller reference diagram
Application diagram of extruder matching chiller

Working principle diagram of extruder and chiller

Summary: The application of the chiller to the extruder can improve the production efficiency of wire forming, and it is also suitable for single-color, double-color, double-layer, and three-layer extrusion of wire and cable insulation materials such as PVC, LDPE, XLPE, LSHF, and TPU. The extruder is cooled to protect the life of the equipment, save energy and many other functions. The chiller series can quickly cool down the extruder. The chiller for extruder can be divided into PLC control type and traditional control type according to different control methods. It is a very practical equipment. Recycling cooling water can save energy and resources and realize environmental protection.

If there is any industry that needs cooling, but you don’t know how much power to match, you can leave a message to us, or contact plus friends +86-13925748878 (same number on WeChat)/(same number on whatsapp), email: jiusheng@dgchiller.com, we will Will provide you with technical solutions. Looking forward to your consultation, thank you!