The role played by the chiller to cool the concrete mixing station

- 2023-05-26-

During the concrete mixing process, the internal volume of the concrete hydration heat increases, especially under high temperature conditions, the heat generated by mixing is higher. In the future maintenance or low temperature, the internal volume of the concrete will decrease due to thermal expansion and contraction. Without cooling and cooling, the hardening will be endangered, such as surface cracking, increased hardening time, and quality degradation.

Concrete can withstand great weight and pressure. In order to prevent rainwater penetration and withstand high temperature environment, it can be modified by dyeing or decorative layer to increase the aesthetic effect.

Therefore, the initial pouring temperature of concrete should be low and reach the limit temperature of the architectural design unit, so as to ensure the quality of the project. During the construction, the concrete mixing plant chiller will be used to cool down the concrete!


Therefore, using a concrete batching plant chiller helps to ensure the quality of concrete, improve its durability and extend its service life.

The following is an introduction to this application of Jiusheng Concrete Mixing Plant Chiller. Due to project requirements, an enterprise needs to cool down the process of thousands of tons of concrete production, and the temperature of ten cubic meters of materials needs to drop below five degrees.

Jiusheng concrete batching plant chiller can play the following roles in concrete production:

1.Control the concrete temperature. Jiusheng concrete batching plant chiller can control its overall temperature by reducing the temperature of concrete, thus improving the quality of concrete. Concrete needs to be controlled in temperature during the production process to ensure its strength and stability.


2.increase the strength of concrete. Cooling water can reduce the water content in concrete, reduce the shrinkage of concrete, and at the same time improve the compactness and compressive strength of concrete. Jiusheng cold concrete water machine can increase the strength of concrete by adjusting the temperature of concrete mixing water.

3.Delay the setting time of concrete. In some cases, it is necessary to delay setting of the concrete so that it can be finished before it is transported, poured and polished. By using Jiusheng concrete batching plant chiller, the setting time of concrete can be extended, and at the same time, the loss and waste caused by this solidification can be avoided.

Summary: This project uses one Jiusheng thermal insulation water tank, two chilled water pumps, one 150T heat dissipation water tower, and a 300KW water-cooled screw chiller with a cooling capacity. Therefore, Jiusheng concrete batching plant chiller plays an important role in the concrete production process. It can control the temperature of concrete, increase the strength of concrete and delay the setting time of concrete, improve the quality and reliability of concrete and reduce production costs.